Jet Fans
The Texas Pneumatic Jet Fans have been designed to provide top performance, minimal maintenance and long life. Our Jet Fans have been tested by an independent facility to AMCA Standard 210. The performance data is taken from the actual test results.
Special Features of the Texas Pneumatic Jet Fans
- The unit consists of a rugged cast-aluminum housing and a cast-aluminum fan blade.
- The hollow shaft and the blade are the only rotating parts. There is no torque on the shaft, as it does not transmit power to the
fan blade as shafts normally do. The compressed air jets on the trailing edge of the fan blade drive the fan. - The fan blade has a hub with four blades which produce adequate static pressure to overcome the resistance
of the system to be ventilated. - Only two of the four blades have jet outlets for the compressed air. All of the blades have airfoil cross sections for more
efficient air flow & higher induction ratios. - The housing is equipped with 6 guide vanes. The vanes neutralize the air spin from the blades and redirect the air flow into an
axial direction. - The housing has a smooth inlet bell for higher CFM, more efficiency, and a lower noise level.
Model # | Weight | BOX WEIGHT |
Minimum Hose Size |
Air Inlet | Max. Pressure |
Depth | Diameter | Mounting Slot |
Bolt Circle Diameter |
---|---|---|---|---|---|---|---|---|---|
TX-JF20 | 96 lbs. 44kg. |
104 lbs 47kg. |
1” 25 mm |
3/4” NPT 19 mm |
150 PSI 10 BAR |
12” 31 cm |
24.5” 62 cm |
1” 25 mm |
20” 51 cm |
TX-JF24 | 131 lbs. 59kg. |
143 lbs. 65 kg |
1” 25 mm |
1” NPT 25 mm |
150 PSI 10 BAR |
12” 31 cm |
31.25” 79 cm |
1” 25 mm |
27.5” – 30.25” 70 – 77 cm |