905.625.0144 info@vulcandemo.com


Small Towable Diesel Mobile Air Compressor

atlas copco
trench roller


The Atlas Copco XATS 250 is a single-stage, oil-injected, rotary screw type air compressor, powered by a liquid- cooled, Four-cylinder turbocharged Kubota diesel engine.

Working Pressure: 75-150 PSI
Free Air Delivery: 190-240 CFM
Lowest Cost of Ownership in its class

The unit hosts the new generation C90 Screw element in its air end combined with a Kubota made diesel engine model V2403-CR-T-E4B with a DPF in DOC exhaust treatment system, cooling circuit, air/oil separation and control systems, an undercarriage with fixed towbar, brakes and pintle eye is available as standard.

Special attention has been given to the overall product quality, user friendliness, ease of serviceability, and economical operation to ensure best in class cost of ownership.

View and/or Download XATS 250 KD: Brochure / Datasheet

XC2003 Controller Functionality:

Displayed while running

  •  Hours
  • Fuel level
  • DEF level
  • RPM
  • Outlet pressure
Read more

Operational Buttons

  • Start and stop of the unit

  • View measurements, settings and alarms

  • Multi position cursor to navigate menus

Compressor measurements displayed

  • Running hours

  • Fuel level

  • Clock

  • Battery voltage

  • Running hours

  • Regulating pressure

  • Emergency stop count

  • Average fuel consumption

  • Minor and major service counters in hours and days

Engine measurements displayed

  • Current fuel rate

  • Engine coolant temperature

  • Engine oil pressure

  • DPF Soot level

  • Engine RPM

Warnings and Shutdowns

  • High temperature engine coolant
  • High temperature compressor oil
  • Engine oil pressure
  • Low fuel level
  • High DPF soot level


  • View current & historical alarms present
  • History of last 20 alarms and events with time and date stamps
  • DM1 & DM2: View current engine codes (SPN/FMI)


  • Manual regeneration of DPF
  • Reset service timers
  • Diagnostics for engine ECU
  • Language settings
  • Unit of measure changes


Model XATS 250 KD
Minimum effective receiver pressure psig 72.51
Maximum effective receiver pressure (Unloaded) psig 150
Actual free air delivery
at pressure setting 100 psig cfm 238
at pressure setting 125 psig cfm 214
at pressure setting 150 psig cfm 189
Fuel consumption
at 100% FAD (full load) US gal/hr 3.43
at 75% FAD US gal/hr 2.34
at 50% FAD US gal/hr 1.95
at 25% FAD US gal/hr 1.70
Specific fuel consumption at 100% FAD g/m3 26.4
Maximum typical oil content of compressed air mg/m3 5
Max. sound pressure level (Lw @ 2000/14/EC) dB(A) 98
Max. sound pressure level (Lp @ ISO 2151) dB(A) 70
Compressed air temperature at outlet valve without aftercooler °F (°C) 177 (80)
Max. ambient temperature at sea level with aftercooler °F (°C) 113 (45)
Min. starting temperature with cold weather equipment °F (°C) -4 (-20)
Min. starting temperature without cold weather equipment °F (°C) 14 (-10)



Emission stage Tier 4F
Number of compression stages 1
Coolant ParCool EG
Number of cylinders 4
Bore mm 87
Stroke mm 102.4
Swept volume l 2.4
Engine power at normal shaft speed @ ISO 9249G hp 65
Full Load rpm 2700
Unload rpm 1800
Capacity of oil sump: – Initial fill US gal 2.5
Capacity of oil sump: – Refill (max) US gal 2.3
Capacity of cooling system US gal 3.03
Capacity of compressor oil system US gal 3
Net capacity of air receiver US gal 8
Air volume at inlet grating (approx.) Cfm/min 5720
Capacity of standard fuel tanks US gal (liter) 23 (87)
Safety valve – minimum opening pressure psig 190